|
Single Mode Standard Coupler 1064nm | |||||
| Features | Applications | |||||
| Low Insertion Loss | Optical Amplifier | |||||
| High Quality and Reliability | Fiber Lasers | |||||
| Testing Systems | ||||||
| Specifications | ||||||
| Parameters | Unit | Values | ||||
| Grade | P | |||||
| Center Wavelength | nm | 1064 | ||||
| Operating Wavelength Range | nm | ±10 | ||||
| Coupling Ratio | % | 01/99 05/95 10/90 20/80 30/70 50/50 | ||||
| Max. Insertion Loss | dB | 21.5/0.25 14.7/0.5 10.9/0.7 7.5/1.2 5.7/1.9 3.5 | ||||
| Max. PDL (Tap/Through Port) | dB | 0.1 | ||||
| Max. Excess Loss | dB | 0.15 | ||||
| Thermal Stability | dB/℃ | ≤ 0.002dB/℃ over -20℃ to +70 ℃ | ||||
| Min. Directivity | 1X2 | 50 dB | ||||
| 2X2 | 60 dB | |||||
| Fiber type | Corning Hi 1060 (not flex type) | |||||
| Package Dimensions | 250um Bare Fiber and dia. 3.0mmX48mm | |||||
| 900um Loose Tube and dia. 3.5mmX66mm | ||||||
| Max. Optical Power (CW) | mW | 300 | ||||
| Max. Tensile Load | N | 5 | ||||
| Operating Temperature | ℃ | -20 ℃ to +70 ℃ | ||||
| *Above specifications are for device without connector. | ||||||
| *For devices with connectors, IL will be 0.3dB higher and RL will be 5dB lower. | ||||||
| Ordering Information | ||||||
| ASMC-①-②②-③③-④-⑤-⑥-⑦-⑧ | ||||||
| ① :Port | ④ : Grade | ⑥: Fiber Type | ||||
| 1 - 1X2 | P - P grade | B - 250um Bare Fiber | ||||
| 2 - 2x2 | L - 900um Loose Tube | |||||
| ②② : Wavelength | ⑤:Connetor Type | ⑦:Fiber Length | ||||
| 06- 1064nm | 1 - FC/UPC | 1 - 1m | ||||
| 2 - FC/APC | S - Specify | |||||
| ③③: Coupling Ratio | 3 - SC/UPC | |||||
| 01 - 01/99 | 4 - SC/APC | ⑧ : Fiber Option | ||||
| 05 - 05/95 | 5 - LC/UPC | H- Corning Hi 1060 | ||||
| 10 - 10/90 | 6 - ST/UPC | |||||
| 20 - 20/80 | N - None | |||||
| 30 - 30/70 | S - Specify | |||||
| 50 - 50/50 | ||||||